Boat Plans Stitch And Glue | Whipray hull 2 but really 1 production skiff

Boat Plans Stitch And Glue

This is the first production Whipray hull # 2 built with the side console and the Yamaha that I asked for. Hull # 1 being the one that I built with the rough deck with the first hull out of the mold. This engine had no where near the power for hole shots and speed that the Mercury 25 had. Of all the Mercury engines the 25, 40 and 60 were the best. But! Sheesh could they be a pain in the butt to start at times. I always cringed when doing a test ride with them as it could sometimes take a bit to get one going. I have in my dighys always used Yamaha 15 two strokes which always start on the first pull. By the time I have around 3,000 plus hours on them I give to a friend and get a new one.
In this picture I am poling Rachel around in the new skiff with Flips push pole that has a natural wood crook in it for the foot.
I gave to Chris Petterson owner of HBBWs all the original photos of building the molds and skiff # 1
That was done in St. Augustine Florida under a simple plastic visqueen shed. It would be nice if he posts them some day on his site. More to come.....

Do you find information about Boat Plans Stitch And Glue are you looking for? If not, below may help you find more information about the Boat Plans Stitch And Glue. Thank you for visiting, have a great day.

Read More..

Boat Plans Nz | Thomass Hayes new Flats skiff build

Boat Plans Nz

Thomas Hayes is a fourth generation boat builder from Florida. He has been working in the Fiberglass production boat building business for 18 years working in all phases of the fiberglass production of boats as a hands on builder to supervisor. He knows his trade very well. 

I have had the pleasure of corresponding with him over this past year answering questions and giving my opinions and some advice on his personal project. 

He started out just wanting to design and build his own skiff for himself and then two more for family. This project has grown from just a hull mold to now a finished complete skiff with all molds ready for production of many more.

Following are some pictures Thomas has been sending me of his skiff in progress.

He has not launched his skiff as I write this blog but it will soon be in the water.

Lots of new ideas being used here in his skiff. Look closely... As I feel lots of these ideas will be finding their way to Others new designs.

Heres his unnamed new skiff just pulled from the mold. For the underbody pictures go back and look at my old blogs about new skiffs. This looks to be the driest running skiff out there. Cant wait to see her running.

Huge bow spray rail and lots of underwater spray defectors.

Look at that bow over hang. This skiff will weigh around 600-700 lbs when finished. Its a nice big skiff.

Heres the deck with all the hatches installed. No hinges on deck!!! All his hinges are hidden with his unique hinge system. Its very simple when seen.

 Bow hatch finished.

Bow hatch details revealed. How cool is this?

His moldings are as good as they get.

His deck mold has no hatches molded into it. This means that he can move his separate hatch molds where ever he or the clients want them. Look next to see how this works.

Because of his perfect moldings he just puts the finished part on the deck mold. He then gelcoats the deck around this part and when it cures this part is then glassed in as part of the deck. When its all pulled out of the mold all he has to do is just trim and slightly buff in the transition edge of these two parts. To me this is brilliant. Saves having to make so many deck molds. Now you can have more shop space.

All hatch tooling parts in place here ready for the deck gelcoat and then glass work.

Now the deck is attached. The clear glass in the bulkhead is the side of the fish live well or bait well depending on what youre up to. This detail he saw in an old Cabo Boat and has carried it into his skiff.

Wont that be fun to look at when its full of bait night fishing? The black ring is the drain.

The not so fun side if youre the bait or the fish caught looking out into the cockpit. Look at the details and finish throughout. Top of the line. 

Skiff going together.

Console being finished. Now look.

Console details. Look at what goes here.

Removable cooler box. 

Thomas says he has been influenced by early Hells Bay and Gordon Skiffs having owned an 18 Waterman and a Glades skiff. 

He has put lots of effort and money into this project that has taken him a year of part time work. At present he says he has almost the same amount of $ in his first finished skiff here and all molds as a new store bought skiff bare hull. 

But he now has the molds to build the next two that his family members want and then he will have to see if he wants to get in the market to build more for others.

Wait and see how this skiff performs. It might be the next " ONE" for you.

Thomas will always be able to say " Yes its my own design and build" with pride.

Theres nothing like being in a boat you built yourself.

Well done Thomas and good building to you a master craftsman.

Do you find information about Boat Plans Nz are you looking for? If not, below may help you find more information about the Boat Plans Nz. Thank you for visiting, have a great day.

Read More..

Boat Plans Uk | Rachel Platt Morejohn my other half

Boat Plans Uk

I have been around for awhile. I talk a lot here on this blog about what I have been up to in designs, boat work and our sailing life. I want to share some pictures of my wife Rachel from this past year of adventuring. I would never have accomplished what I have to date if not for her being by my side literally or backing me up back home when Iam off single handing. We have been together for over 26 years now. I wake up every day looking forward to what she has to say. 

Rachel trying the paddle board out in front of our place in the Bahamas

Rachel posing in front of our yacht in Antigua. The Hogfish is anchored behind all these other yachts.

Rachel with her first cup of tea in the morning

Now Iam ready to hear about what she dreamed about last night or whats on her mind. Its breakfast time on Hogfish.

The two of us after running a 5 mile Hash in Antigua.

Me stalking Rachel in Martinique 

Having lunch in Tyrell bay in Carriacou 

St. Barts 

Looking for beach treasures a few days ago

Racing Wild Bird off of Nevis

Passing by a Smurff boat in Grenada yesterday.

Trying on a huge piece of sea glass a few days ago.

The two of us on Hogfish celebrating Rachels 50 again birthday back in March.

The truth is I dont know what I would do without her. 

Do you find information about Boat Plans Uk are you looking for? If not, below may help you find more information about the Boat Plans Uk. Thank you for visiting, have a great day.

Read More..

Boat Plans For A Chesapeake Deadrise | Short cutting the Boatbuilding Process

Boat Plans For A Chesapeake Deadrise

Many people want to build a boat for themselves. Some are like me and just dive into a project, believing that we can learn how to do it properly during the process. Others are more cautious and will investigate everything about the process before taking the step of cutting the first piece of wood. Some of them will never even make that first cut, unconvinced that they will be able to complete the project.

Most boatbuilding projects that are started do get completed but there are others that the original builder is not able to complete for one reason or another. This may be for any of a number of reasons, from financial problems to illness in the family or even death of the builder.

These partially completed boats are an opportunity for those potential builders who dont have the confidence to take a project from that first cut through to launching the completed boat. If bought by someone else, such an incomplete project can knock the major part off the timescale needed for completion.

Didi 34 waiting for a new owner to complete her

 We recently sold a semi-completed project for a Dix 43 Pilot that was available in South Africa. The new owner is now completing the project to take him and his family cruising distant waters.

We have other semi-completed projects listed on our brokerage pages that wait for new owners to complete them. Listings that we have at present are for plywood Didi 26 and Didi 34 and an aluminium Dix 38 Pilot.

The Didi 34 project is particularly worthy of consideration. It became available after the builder succumbed to cancer. His wife needs to sell it and has reduced the price to a level that makes it a very viable project to get a speedy cruiser/racer afloat in a fairly short time and at low cost.

So, if you are interested in building a boat for yourself but want a head-start on the project, have a look at the semi-completed projects on our brokerage pages.

Do you find information about Boat Plans For A Chesapeake Deadrise are you looking for? If not, below may help you find more information about the Boat Plans For A Chesapeake Deadrise. Thank you for visiting, have a great day.

Read More..

Boat Plans Australia | More flats boat photos from 1982 86

Boat Plans Australia

You can click on the photos to make them full size.

These boats were built in the Florida Keys in Islamorada , and Key largo.

Bert Sherbs 17 Mako Remake

Berts boat. Boy did they make ugly towers back then.

 Mako remake plug ,waiting for mold gelcoat to cure befor laminating.

Mako remake at Bayside Inn which is now the Bass Pro extravaganza in Islamorada. 

Carl Navarreas skiff in my new shop Back Bay Boats in Tavenier Key largo 1985.

Flipping over Hal Chittums Mako experimental after painting. You can see the stringers printing tru the bottom because they are made of wood.

See the boat really was called the Mako experimental.

Glassing in the boxes, look at how narrow the hatch channels were. They had 1/4 in copper tubbing for draining so a real nightmare.

Stern view of Hals skiff, you can see all the glassed over plywood.

Glassing in the sheer overhang with more plywood. This boat weighed a ton and I know that Hal even at that time in his life at 31 knew that if there was a better way he wanted to be part of it.

Inside shot of the cored Sea Craft I built for Dick Negley. This was another boat where I bought a finished boat on a trailer for 800.00 dollars and gutted the boat down to the bare skin. Dick had a lot of good ideas for this boat which was a great project and a great guy to work for. 

Dicks Sea Craft had a 100 gallon fuel tank under the console which could all be removed , the boat had three live wells, a 235 Johnson on the stern with a jack plate toe kick and a full transom across the stern. Because we saved so much weight with the build it could carry a lot of stuff , go fast and shallow for the places he fished in Texas and the Gulf. It is till owned by his friend Dev. This is 1983, the two Mako remakes and this skiff took Lawanda and I 12 months to finish at a set price and time frame.

Bow of Sea Craft

Dick Neglys scooter boat being planked up

 Hull skin on temporary framing ready for outer skin.

My little wedge tunnel for the 200 Merc that was fitted with a jet drive.

Pretty simple boat.

Inside showing stringers going in with Uni S- glass. Any boat that has Kevlar on the inside is wasting your money. E - glass done right will do just great, s- glass is only a little less stiffer than Carbon but a whole lot less in cost. Carbon is great in certain areas and if you have deep pockets then its the go to material for certain projects. All these boats were built using Dion resin which is a polyester and all these boats are still going strong.

Lawanda next to the first half of the skin coat using Kevlar on the out side. The day that Dick first launched the boat he ran over a steel pipe sticking out of the bottom and all you could see was a slight scratch.

Testing the bottom 

Flipped over working on the insides. I will post pictures of this boat fishing when I find the photos.

Our shop Back Bay Boats next to the Tavernier Health Dept. It is an auto body shop now.

Before getting into flats boats I built sailboats, this a boat for Lawanda and I being built next to the Sea Lark building which is now Bass world. 1982

Lawanda and I going out in our Bahamian catboat to set some Lobster habitats . We ate a lot of lobster back then as they were everywhere. This is 1982

We all raced in the afternoons off what is now the Lorrilie resturant. No one was there in 1982. I built these three cats.

Myself and Dave Calvert at Bayside Inn with my new  sailboat hull which I have just built and am moving here to fishing building. Dave was a sailmaker there and went on to help Steve Fosset break the North Atlantic crossing record on Playstation. Little did we know the fun we were going to have down the road from this day in 1980.

One of many little dorys I would build in an evening. 

A 2 part folding row boat I built in an attic in the Bahamas. The boat had to fit through the window.

 I do not know if World Wide Sportsmen tore these down at their place in Islamorada. This was one of many projects that Ray Dye had me do while I worked there .

 So a few more shots from the past. Sure wish I still had the energy I had then.
More to come.

Do you find information about Boat Plans Australia are you looking for? If not, below may help you find more information about the Boat Plans Australia. Thank you for visiting, have a great day.

Read More..