Tampilkan postingan dengan label setting. Tampilkan semua postingan
Tampilkan postingan dengan label setting. Tampilkan semua postingan

Boat Building Plans And Kits | Setting up a website again

| 0 komentar |

Boat Building Plans And Kits








Like Hogfish maximus in this photo taken by Chris after he put our boat on the beach at Manjack Cay, Abaco to work on her, I am still not off the ground and into smooth sailing. But for me there is no beach, instead an old laptop. The ocean water Hogfish is waiting for consists of internet Blogs and Websites for me.

I am Chris wife Rachel, let me explain.
Both Chris and I are from another era of exploration. Surfing the web is less exciting than surfing a wave and navigating the web is definately not either of our expertise. But we do get out from time to time on the electronic ocean and enjoy reading other peoples blogs and seeing photos on websites from all over the world. We are information junkies and the internet is a huge fix! And so, we too would like to enter into the current trend (yes I did type that and will carry on, pun intended) Oceans and seas, oh my.

BUT, as I typed at the start, In the beginning there is a lot to learn... And time to spend... and a perfectly good ocean to swim in just next to me. And children to keep track of, yes Kalessin you are still me child; THAT will never change, and Lilly, you are just behind me, looking over my shoulder but I still need to nudge you on to another activity other than bugging your Mom when she is trying to type (is the computer keyboard the new telephone?)

All this and technology that has a language that consists totally of non words like HTMLs and SSPs and WTFs?

What I have learned so far is that most of my photos appear to be of things of a size that I never in my life as an adult have observed, there is a delete button that means it, my computer is outdated and everyone except me thinks I should use it as a dinghy anchor, and I am an optimist because I think there is a high tide for me here on the Web (to float in and even swim strong keyboard strokes) and therefore soon there will be a Blog worth reading about Chris art, Chris boat plans, and of our sailboat Hogfish maximus and our adventures aboard her. We also want to show you our slice of Bahamian shoreside, and invite you to enjoy it as we do love it. As always we have plans A through Epsilon and want to create an interest through the internet.

Be prepared for biased opinions, very strong opinions and even grander provocations. This is going to be another Shallow Minded adventure but this time into the Deep Sea of the internet.

Thank you for your patience. especially you Cristobal.

Dive, dive, dive!!!!




Hogfish maximus during The Round Island Race in Bequia Easter Regatta.




Do you find information about Boat Building Plans And Kits are you looking for? If not, below may help you find more information about the Boat Building Plans And Kits. Thank you for visiting, have a great day.
Read More..

Boat Blind Plans | Daves musings about setting up and adjusting sails on R C model Boat

| 0 komentar |

Boat Blind Plans


Dry sailing -set up.

Place the model in a stand. Head the model into them wind.

Things that can be moved, and adjusted: Mast step. Mast rake. Boom vangs. Shrouds. stays. Jumper stays. Head stay/jib stay. Sail shape - loose foot. out-hauls.

Attach the sails to the mast.

Set the sail winches in fully trimmed position while allowing sheets to be slack.

Stand the mast with standing rigging attached in the center step position.

Hook the jib swivel into the middle slot of the jib rack. {The jib boom needs to clear the mast.}

Connect the side stays to the chain plates and adjust so the mast is straight and vertical.

Connect the back stay to the back stay fitting.
The jib stay and back stay will need adjusting to set the mast in vertical position.

Move the out-haul of the sails along the boom to give the sails to have some "belly". Pulling the sails out along the boom flattens their shape. The belly (or shape) of the sails will be determined later and the sail shape will be determined by how windy it is.

Where you attach the sheets to the booms will take into account the type and adjustments available for the sail control. The booms should be full out (90 degrees to the center line of the hull) when the SCU is full out and then the booms should be just about over the center line when fully trimmed in. ( I see 10 degrees as suggested angle to center line). The length of jib sheet trimmed and the length of main sheet trimmed is a factor in setting up the sail control so the sails are coordinated properly when sailing. The SCU handles a much longer main sheet than the jib sheet. The use of jib traveler and mainsheet traveler can help position the sails when fully trimmed in. Unless two servos (SCUs) are used a single SCU has the task of coordinating the positioning of the jib and main.

Turn on the R/C and run the SCU.
Test out SCU setting with the sails full out and fully trimmed.

With the mast set up and sails adjusted roughly in position it time to launch and sail.
--
Setting Sail on the water.

Before launching TURN on the radio on the boat. I have seen many models set loose to sail with the on board receiver and sail controls not tuned on and very unhappy skippers watching as their model sails away towards the horizon.

The initial rigging and sail settings are based in getting the model to sail a strait line while close hauled (sails trimmed in) and sailing up-wind.

Properly trimmed the rig will allow the model to sail it self in a straight line with just a minor tendency to "round-up" (i.e. sail itself dead into the wind). If or example you find you are constantly pulling the tiller (i.e. rudder) hard over to pull the model back on course to keep from heading in to the wind your model has weather helm which means your mast and jib must be re-positioned. When tacking if your model stalls into the wind and wont tack? Try different rig setting.

--
Setting Sails
The art of tuning the rig on a sail boat is detailed in books written for racing yachts and boats.

"DINGHY SAILS"
by Jeremy. Howard-Williams

"The Best of Sail Trim:
A Selection of Articles from Sail Magazine"

"Sail Trim: Theory And Practice"
by Peter Hahne

My observations and commentary on tuning are from an amateur and are at best suggestions not professional advice.

Observation Number One!!
Model sails that are single panel loose footed sails rely on the shape of the sail established by the gap between the boom and the foot of the sail. Model sails with "shape" sewn into the sail fabric still are loose footed. Also the lift of the boom also factors in determining the shape and performance of the sails.

Hauling a sail into the center line and at the same time pulling down on the sail can flatten the fabric and kill the sail shape. I like to use travelers to position the sail to the desired point near the center line. Then you can set the point of maximum driving force and not wreck the sail shape.

On a big boat the skipper can changer the suit of sails to match the cut of the sail with the wind conditions. In the case of a model a skipper can change where the out-haul is along the boom, light air adding belly to increase the drive, heavy air pulling the sail out further changing the sails airfoil.

The jib and mainsail work as a system. A skipper has all manner of combinations that may be set relating the two sails. If the models did not have jib clubs they could overlap the mainsail. So model sailors have to adjust the "slot" between the jib and the main to get the maximum driving combined air foil.

In heavy air you may want to close the slot and ease the main so that the jib slightly back-winds the main to help the model sail flatter (less heeling).

Dont forget on a model it is easy to rake the mast fore and aft to trim the sailing characteristics to match wind conditions.
--
A digital camera can be a terrific diagnostic tool for seeing what is happening on your model. You can look at pictures and spot misadjustments. Bends in mast, wrinkles in sails etc. Does you models mast rake forward down wind? Is the back stay bending the top of the mast. How are the jumper/jenny stays adjusted do they balance the tensions between the jib and the back stay?
--
The late Manny Costa of RI always stressed, change one thing at a time to see what changes. He also stressed sailing a pair of models. One model being tuned and sailing against the second to see if the single adjustment improved performance.

Round-Robin racing in pairs is an excellent way to evaluate how your model performs.

Do you find information about Boat Blind Plans are you looking for? If not, below may help you find more information about the Boat Blind Plans. Thank you for visiting, have a great day.
Read More..

Boat Plans And Patterns | Star 45 Setting Sail on line How To Sail resources

| 0 komentar |

Boat Plans And Patterns


From: "Don Keeney" <1keyknee@281.com>
Date: Sun, 19 Nov 2006 15:39:26 -0600
Subject: [Star45] Sail Trim

A great place to learn about sail trim and sailing in general.
http://www.sailingusa.info/sail_trim.htm

Don Keeney
Star 45 Class Secretary
--
Outstanding recommendation. Wonderful site. full of photographs and all sorts of instructional materials. Pictures of tells and how to read them:)

Another must place to visit (you can try out your sailing skills):
National Geographics Interactive Sailing:

Master rudder and sail to get your boat going as fast as possible no matter what direction youre sailing in-or which way the winds blowing.

Controls available:

Sail Adjuster: Use the left sliding controller to rotate the sail in relation to shifting wind (shown as arrows). When you cross the path of the wind, your sail will swing to the opposite side.

Rudder Adjuster: Using the right sliding controller, steer to port (left) or starboard (right).


Uncle Dave

Do you find information about Boat Plans And Patterns are you looking for? If not, below may help you find more information about the Boat Plans And Patterns. Thank you for visiting, have a great day.
Read More..

Boat Plans African Queen | Bekee G

| 0 komentar |

Boat Plans African Queen


This bit was written 2009. I have added photos and would now like to share 4 years later.

and so it goes...

There is a certain amount of pride concerning our "engine less status" that the captain and crew of the sailing vessel Hogfish maximus has shared since her launch in 1999.

Yes, there was a 9.9 "kicker" on the stern for a few years, but it was rarely used and then when put into action was capable of not much beyond getting us to a dock for water in flat calm conditions. Mr. politically incorrect name, which will now be know as PIN, Sir (a Yamaha, what else?) was much appreciated in these times, but spent most its life with us pulled up on the stern bracket out of the water.

We did utilize Mr. PIN Sir beyond the usual, for a memorable Gulf Stream crossing in 2003. We left the Florida Keys laden with supplies for our wee property in the Bahamas. The cargo included three dinghies, bicycles, a fridge (small but effective for a time) tools of all kinds, garden/building/plumbing, you name it we had it (a wheelbarrow!!!) and of course lots of food. There was not much waterline showing and with Grampa, kids, dog and cat, the Captain and I set off with a fair breeze on the stern. The fair breeze pretty much died out rather quickly. Mr. PIN Sir pushed the heavily laden Hogfish maximus across the stream and the Bahama Banks with very little complaint until its energetic thrust ended in the current and confusion of Nassau Harbour, right next to the cruise ships. Of course we anchored and tried to repair but parts were needed and it was time to keep moving so early light we weighed anchor and sailed the rest of the way to our destination. This tale of Mr. PIN Sirs bravery is really his only hurrah. Not much excitement in refilling water tanks before or since its heroic journey just described.
So, truly we have sailed engine less in the usual sense. No turning on the "iron Genny" when speed dips below such and such knots. I have heard sailors insist on never sailing slower than 5 knots, maybe 3 knots, and there are few who "endure" 2 knots of speed for days on end as we did crossing the Atlantic.

On the east to west traverse we had a knot of current and at times an exhilarating 3 knots was under our hull during the light winds of our crossing. But we had no choice as Mr. PIN Sir, though parts restored and still able to push us along in flat calms, was no use for long range. Besides the Atlantic swell would have been too much for him to work efficiently in.

And yet we loved the sailing and as stated, were proud of our basically engine less, strictly sail status. But the summer of 2009 our status changed.

Enter the perfect motor for Hogfish maximus. A Westerbeke 42. For all the delicious details and diagrams click on the provided link;

WESTERBEKE 42B

In 2005, during Hurricane Emily, a sailboat named Lucky Lady lost its holding in Prickly Bay and landed on Glovers Island to the south of Grenada in the West Indies. The "Lucky" part of the boats name perhaps being that running into the island during a hurricane stopped the boat and captain from being swept out to sea in 90 knots of wind. For the help the Grenadian Coast guard gave to the Lucky Lady, the captain in turn gave them the Westerbeke 42. Chris then purchased the engine from the Coast guard.

One cylinder had been submerged but otherwise was in great condition with only 326 hours of running time logged on it. With the help of dear friend Gareth, even more dear after spending days in the heat of a Grenadian summer cleaning the entire engine and repairing said cylinder, we had an almost new engine to install in Hogfish maximus.

Chris had planned when designing Hogfish m. for an engine of the size of the Westerbeke. Up until now the "engine room" housed power of another kind. Batteries, kept charged by solar panels and at one time a wind generator as well, (it was too loud, it did very little for us in the less constant winds of the Bahamas and sailing downwind was unusable, and mostly we didnt like it) had their place under the doghouse. Now batteries have a new space created in the nav area after the placement of our engine. Where we once had storage for whatever there is now a 45 gallon fuel tank and the cabin that our eldest child Kalessin vacated, to begin her own search for her own dreams turned realities, has now a slightly narrower bunk and the lockers have tools, spare filters and the etcetteras one would need for that which we have come to know as "Beke G." (thanks again Gareth!!!) Wires and leads and filters and switch panels and all that are also in the cabin.

A personal note, there is still room to sleep and live Kalessin, you havent been planked, but it is really handy to have the space... thanks! We do love you.

Accessibility is key to engines as they need maintenance and a helpful encouraging look see from time to time (I do this well, the look see and the "good boy" pat) All of the engine is accessible; top hatch removes, port and starboard side have opening doors, front stairs remove for full access and the backside is accessible from both cabins. Panels lift off to access cutlass bearing and shaft. No secrets has our Beke G.! Full disclosure under Hogfish maximus servitude. This makes the drama of having an engine a bit easier to take. Since maintenance is key to good performance, getting to the engine easily is mandatory. Plus, should anything go awry and it is bound to in the worst of circumstances not having to remove half the galley or the entire cockpit and its contents to get to the problem will be a bonus manoeuvre. Good thinking captain, excellent execution of a basic need that is so often ignored! Access!

Ah yes, one may have noticed a bit of a time lag between the acquisition of Lucky Ladys old engine and the actual use of Hogfish maximus new engine. A few years did pass. Four to be exact. The yet unnamed engine sailed with us from Grenada to the Bahamas under the table (doesnt everybody have an engine in the main salon?) Besides the rocks and bones and wood needed help balancing the boat. That would be another story. This is already getting too long. And it sailed in the same place to north Florida. Then transformation of the interior of Hogfish maximus took place at our friends dock (thank you Bill and Amy) and engine settled into its new bed for another couple of years. It was another half year before the captain got the nerve to actually drill another hole on the hull. Thanks to Abaco Yacht Services in Green turtle Cay, arguably the best yard in the Bahamas, Chris had the peace of mind to gain the courage to put the shaft in place. So, shaft in place, he sailed back to our wee spot in Eleuthera (I didnt mention anything about propeller did I?) We were given a three bladed bronze prop by Wyatt Huggins and long term friend who had great interest in Hogfish getting into the motoring mode. Thank you, thank you, Wyatt. The propeller had a cozy spot next to the engine down below, dry and barnacle free. Another year passes and back again in Grenada. Chris single handed Hogfish maximus from Eleuthera to Grenada with a stop in St Maartin. Full circle had the Westerbeke travelled without breaking out in a diesel sweat!

Did I mention we liked being strictly sail. The pride thing? And did anyone ever mention a bit of fear of holes in the boat? I did! Looking for the perfect prop as well as just getting to the point of; Okay it is time to bite the bullet and finish the installation of the thing. And so in Grenada is a miracle worker of an engine mechanic named Mike Bingly, co-owner of Palm Tree marine. In him we put our trust and he performed the final wiring task no less than expected. He also went over all systems pertaining to engine and gave Chris the thumbs up.




Another professional came by and helped us in the process with a major part he happened to have aboard. And he so gracefully offered to place the propeller on the shaft as well. Thank you Brett Fairhead!!

A few more weeks went by, and a few more sailing months and then all that was needed was the defiling of the boat with the addition of diesel. I mean we just had to put diesel in the tank!

I must confess here I was not keen on the possibility of the boat smelling of engine. I used to get sea sick, still might, given the right circumstance and fear on my part, and worried that my ease at sea would turn to malaise if the engine began burping out diesel fumes and would also just plain stink up my boat! But many friends assured me that engines dont need to be smelly with the correct maintenance (thank you Chris for the all access engine room) and also the addition of Biofuel type substances.

And so it goes.

Bits and bobs of parts bought, found, procured what have you, diesel in, key in hole, button pushed and well, IT WORKS!

And we motored!!! Round and round the anchorage.

And we motor sailed!!! All the way to Carriacou. Such a strange sensation. Even stranger to be at anchor way before sundown, with time to marvel at the miracle of an engine on board that pushes the boat along quite comfortably at sea in all conditions met so far, and also time to go ashore for pizza!

We have even motor sailed DOWNWIND. Just to see what it was like. Eh Captain? "Pretty ridiculous." The quotation still stands therefore no motoring downwind.

I still am amazed at the simple convenience of it all.

Not so simple installation, well, quite simple really, just took a long, long, long time and much help from a few good men.

SO - We still sail off anchor and still sail to the mooring (picking up the mooring is another rather crazy tale - perhaps another post and even some unfortunate photos from a helpful bystander er... byfloater? even) and we will still sail through the anchorages as we get from here to there, there to here, funny things are everywhere.*



*if I misquote do i need permission?







Do you find information about Boat Plans African Queen are you looking for? If not, below may help you find more information about the Boat Plans African Queen. Thank you for visiting, have a great day.
Read More..