Boat Designs And Plans | Jims Didi Sport 15 Nears Completion

Boat Designs And Plans

Followers of this blog have read about the DS15 being built by Jim Foot in Port Elizabeth, South Africa. His project is nearly done and is looking great. He is into the rigging stages and should launch in a few weeks.

Foredeck and mast deck panels fitted.

Foredeck almost complete. Spinnaker chute on right of centreline.

Jims DS15 tries her dolly for size, showing her clean, modern hull.

DS15 shows her bottom and her performance potential.

Clean lines and powerful stern.

Mast and standing rigging, waiting for her sails.

Next instalment should be launching and sea trials in a few weeks. Until then, see more at http://dixdesign.com.

Do you find information about Boat Designs And Plans are you looking for? If not, below may help you find more information about the Boat Designs And Plans. Thank you for visiting, have a great day.

Read More..

Pontoon Boat Plans Aluminum | Yachting Monthly Capsize Video

Pontoon Boat Plans Aluminum

Yachting Monthly have a very interesting  video of a capsize test on their YouTube Channel. I only became aware of it yesterday when it was highlighted by Scuttlebutt Sailing News.

Many have read the accounts that I have written about our capsize experience on the Didi 38 "Black Cat" in the Cape To Rio Race 2014. It is not possible to visualise what it is like to be there in that situation, even if you sit inside your boat and try to imagine it turning around you but this video goes a long way to help visualise it. It is not fully realistic because the roof stays at the top as the boat rotates, so the world is rotating around the boat rather than the boat rotating within the world around it. To provide better visualisation the camera needs to stay upright while the boat goes upside-down.

Bear in mind that this test is in flat water and the boat is rotated quite slowly from upright to upside-down, then rights itself quickly. Normally a capsize will happen in seas that are large and confused, so it is a much more violent process than seen in the video, with the boat being thrown in confused directions while it capsizes. Despite that, it is worth watching, to see the way that crew, equipment, etc was moved around the cabin and to see just how much water came in even in that still water.

It is not an experience that I would recommend to anyone, yet it is an experience that I am glad to have had and to have survived.

It also validates the toughness of the methods of construction that I have used for these plywood designs, that "Black Cat" came through with minimal damage.

To see our range of designs to carry you across the dam or around the world, please visit http://dixdesign.com/

Do you find information about Pontoon Boat Plans Aluminum are you looking for? If not, below may help you find more information about the Pontoon Boat Plans Aluminum. Thank you for visiting, have a great day.

Read More..

Boat Plans Bateau | More about Jims DS15 Project

Boat Plans Bateau

In a November post I wrote about the Didi Sport 15 that is being built in Port Elizabeth, South Africa, by Jim Foot. Jim has continued to build at a good pace and his boat is moving into the final stages of construction.

Jim has provided a steady stream of photos that document his project through all of its stages. He appears to be doing a very capable build and his boat should be sailing within months.

Jim bought a plywood kit from CKD Boats in Cape Town. It was cut by CNC router using cutting files that we prepared and supplied. Similar kits can also be cut by our other kit suppliers in other countries.

Beautiful standard of hull finish shows off the hull shape.

Internal framing of Jims DS15 hull, CNC-cut by CKD Boats in Cape Town.

Spinnaker pole launch tube

Internal surfaces sealed with 3 coats epoxy

Adding doublers for mainsheet track and epoxy-coating underside of deck.

Jigsaw-jointed cockpit sole installed and cockpit sides being fitted.

Framing of foredeck and cambered mastdeck.

Mastdeck being fitted.

Cockpit and decks nearing completion.

Mound for rudder pintles.

Casting lead keel bulb.

Thanks Jim for your photos and for your enthusiasm. I look forward to the launch and sailing photos of your new boat.

To see our full range of designs, please visit http://dixdesign.com/.


Do you find information about Boat Plans Bateau are you looking for? If not, below may help you find more information about the Boat Plans Bateau. Thank you for visiting, have a great day.

Read More..

Wood Boat Plans And Kits | Cape Cutter 19 Launch in Cape Town

Wood Boat Plans And Kits

Nick Kulenkampff, of Cape Town, bought plans from us in November 2013 for the Cape Cutter 19, to be built in lapstrake plywood. I only received one question from him and that was on choice of plywood for the build. A few days ago I received another email from him, with launch photos attached. He launched his boat, named "Mimi", at Royal Cape Yacht Club, in February.

In his email, Nick said "thank you for a beautiful design and also for a set of plans that were spot on. I thoroughly enjoyed the entire process." From the photos it appears that he made a pretty good job of the build, which was also quicker than most at about 15 months.

This boat is available in GRP from Cape Cutter Yachts in UK. It is the smaller sister to our popular Cape Henry 21 design.

Here are some of Nicks build photos, with explanations

Making bulkheads. These are cut from full-size Mylar patterns, included in the plans.

Transom, laminated from multiple layers of plywood.

Bulkheads and transom set up on building stocks.

Bottom skin going on. Plenty of clamps needed.

Bilge panel gong on. Keel deadwood and wood bilge keels fitted. This bilge keel is to protect the hull when aground, serving purely as a support to keep the hull skin clear of pebbles.

Forward bottom panel. Fitting this panel is the most difficult part of the build, due to the amount of twist in the panel. The twist is what forms the fine bow for good performance.

Hull epoxy-coated, primed and ready for paint.

Building the cockpit. Nicks work is very neat.

Interior, looking forward, built  before fitting the deck.

Interior, looking aft. Painting in progress.

Deck stringers glued into pre-cut slots

Painted and brightwork being done. Almost ready to get wet.

This view shows why these little boats are so quick. That fine bow works vvery well.

Launch day. The yellow boat below the bow is "Black Cat", the Didi 38 that I built.

Afloat and waiting for her rig to be set up.

Thank you, Nick, for the set of photos. She looks good and I am sure you will have many good times sailing her.

To see more of this and out other designs, visit http://dixdesign.com/.

Do you find information about Wood Boat Plans And Kits are you looking for? If not, below may help you find more information about the Wood Boat Plans And Kits. Thank you for visiting, have a great day.

Read More..