Boat Plans At Mystic Seaport | Long Distance in Small Boats

Boat Plans At Mystic Seaport

For as long as man has been on this gorgeous blue planet of ours he has sought to find adventure wherever he can. There have always been those who simply have to see what is over that next hill. When we all know what is over that next hill then the adventure becomes going over that next hill in some way that has never been done before. It has probably not been done that way before because it is just too big a challenge for most people to consider trying.

That insurmountable challenge is the best of reasons for some people to try it anyway, to prove that it actually can be done and to prove themselves to themselves. In the process of succeeding they also prove themselves to the rest of mankind. Some of mankind thinks it exceedingly silly to do these things and will be eternally critical of those who try. They have no adventurous spirit themselves and would never attempt anything that they consider the least bit risky or dangerous. Some of them become bureaucrats to control others or they encourage bureaucrats to stop the adventurers from being adventurous, a misguided attempt to protect them from themselves.

I have written here before about one such adventurous person, Anthony Steward. He is the only person to have sailed around the world in an open boat. I am fortunate that Anthony selected my TLC 19 hull as the basis for his open boat voyage. Everyone thought that he was crazy in his quest but he was permitted to do it. That is how it should be.

Now I am working on a design for another person who has the aim of circumnavigating the globe in a different way from how everyone else has done it before. His name is Davey du Plessis and he plans to peddle his way around the world. My job is to provide to him the boat that I believe will give him his best chance for success. At the same time, it has to be economical to construct because he is on a tight budget for the voyage.

The result is a multi-chine plywood craft of approximately 23ft length overall. The hull is of fairly classic form that will also make an excellent pulling boat. It has a fine bow at waterline for wave penetration and a fine stern for low drag at the low speeds that can be expected under long term human power.

Hull of the Ocean Peddle Boat for Davey du Plessis.

The superstructure is also multi-chine plywood, so that it can be quickly and easily built using stitch-&-glue building methods. It is a closed boat for maximum protection from the elements but with the ability to open up large surfaces of the central cockpit area to allow air to flow through when needed. This also increases the safety tremendously in rough conditions, making her essentially self-righting if all of the gear is properly stowed and secured.

Basic 3D model of hull and deck.

The model above is very basic, it doesnt show the details of the deck, like windows, opening panels, hatches, solar panels etc, which are detailed into the building drawings.

The whole concept is conceived to make a seaworthy boat. It is not designed for speed, it is designed for cruising slowly under human power, aided where possible by wind, wave and current.

What about the crazy man who will live long term inside this eggshell? Maybe Davey is not as crazy as you think or maybe he is more crazy than you think, I doubt that he knows for sure. He is no doubt less crazy than Anthony Steward because Davey has chosen to have a boat that will give him shelter for his long voyage. Does Davey du Plessis have the legs for this voyage? You can bet that he does, he has ridden a bicycle the length of Africa, from Cairo to Cape Town. Davey is an adventurer and I applaud him for it.

Daveys boat will be built in Knysna on the South African South Coast. The builder is his uncle, Tertius du Plessis, who has previously built one of my designs, a Didi 34.  I doubt that I will even get to see Daveys boat because his route is unlikely to pass anywhere near to me in USA.

I will add this boat to my website when the design is complete. I will no doubt offer it as an open pulling boat but it is possible that there are others who would also like to build it as a trans-ocean rowboat or peddleboat.

To see our full range of designs, please visit http://dixdesign.com/.


Do you find information about Boat Plans At Mystic Seaport are you looking for? If not, below may help you find more information about the Boat Plans At Mystic Seaport. Thank you for visiting, have a great day.

Read More..

Boat Plans Aluminium Australia | Update on Didi Sport 15 and Didi 950

Boat Plans Aluminium Australia

I have recently added two new radius chine plywood designs to our range and wrote about them on this blog. Here are updates on both boats.

Yesterday I visited the prototype of the Didi Sport 15 (DS15) that is being built by Hunter Gall in Virginia Beach. I hadnt seen it in the flesh for a few weeks and wanted to see how the deck is looking as it comes together. Hunter is doing a really nice job of his project, working slowly but meticulously.

His boat, "Scallywag", is looking very pretty. He stained the hull surfaces blue and the deck surfaces red before doing the epoxy coatings and these colours will be highlighted by areas of clear-finished timber. It all entailed a tremendous amount of extra work to get it right than if he had painted it in the normal way. The final result is very attractive and she will be an eye-catcher when complete. Hunter can be pleased with the overall results.

The deck configuration that I designed is unusual, with a raised mast deck and wave-breaker above a flat foredeck and the open self-draining cockpit. It gives a decidedly retro image to the deck, over the thoroughly modern hull. It reminds me somewhat of the Lightweight Australian Sharpies that my Dad sailed in South Africa when I was a child. That makes it  somehow fitting that Hunter Gall is Australian, I am South African and we have ended up working together on this project in USA.

Hunter Galls DS15 project nearing completion

Other news on the DS15 is that work will start in the next few weeks on moulds to build a composite version in Europe. I will release more information about it after I return from the Cape to Rio Race, by which time the builder may be ready to start receiving enquiries.

The other boat was the Didi 950, for which the prototype kit has been cut and will be delivered to the builder in the next week or two. It appears that this is going to be a popular design because we have sold plan packages for another three boats since announcing the design.

Didi 950, bigger sister to the DS15

 One of those boats will result in a variation on the design, with a lifting keel. A lifting keel was part of the original concept for the builder of the prototype but he decided in the end on the simplicity of a fixed keel. The lifting keel proved to be a very viable option, using the same basic keel support arrangement as the fixed keel with no structural redesign. The major difference will be moving the motor aft to a position under the companionway, driving a saildrive rather than a shaft. This is to make room for the lifting keel to rise through the galley central locker unit.

The prototype of this design is to be built in Ohio, USA. The others that have been ordered will be built in Australia, Latvia and Greece. There is interest from other countries as well.

To see our full range of designs, please visit http://dixdesign.com/.

Do you find information about Boat Plans Aluminium Australia are you looking for? If not, below may help you find more information about the Boat Plans Aluminium Australia. Thank you for visiting, have a great day.

Read More..

Boat Designs And Plans | Jims Didi Sport 15 Nears Completion

Boat Designs And Plans

Followers of this blog have read about the DS15 being built by Jim Foot in Port Elizabeth, South Africa. His project is nearly done and is looking great. He is into the rigging stages and should launch in a few weeks.

Foredeck and mast deck panels fitted.

Foredeck almost complete. Spinnaker chute on right of centreline.

Jims DS15 tries her dolly for size, showing her clean, modern hull.

DS15 shows her bottom and her performance potential.

Clean lines and powerful stern.

Mast and standing rigging, waiting for her sails.

Next instalment should be launching and sea trials in a few weeks. Until then, see more at http://dixdesign.com.

Do you find information about Boat Designs And Plans are you looking for? If not, below may help you find more information about the Boat Designs And Plans. Thank you for visiting, have a great day.

Read More..

Boat Plans Arch Davis | Didi Sport 15 DS15 Launch

Boat Plans Arch Davis

The long-awaited day arrived this weekend. Jim Foot, in Port Elizabeth, South Africa, launched his self-built DS15 at Algoa Bay Yacht Club. He started with a pre-cut plywood kit supplied by CKD Boats in Cape Town and took approximately 6 months of his spare time from start to launch.

DS15 "Bateleur" about to get wet for the first time.

 Despite the very light wind, they had good sailing and were impressed by performance. Jims first comments are:-

She sails beautifully and she is fast. Beating into a chop in light wind this am going at about 3,7 kts felt happy. Then was told wind spd 4 kts by passing boat quite amazing.

Very well behaved. No balance issues. Save a bit of lee helm with the kite up. Loads of compliments from older sailors. Hunter Gall get on the water you dont know what you are missing. This is one good boat. Ps only sailed in bulb config at this stage.
A few changes to make. But not many. Congrats Dudley on a fantastic hull. Its a beaut.

Ready for sails and rarin to go.

Rigging the sails. Clean deck layout and large cockpit.

Jims friend Mark Dawson was with him for the first sail and passed these comments:-

Lucky enough to be the first to sail this boat with James Norman Foot. What a beaut! After a hairy moment of rocking the boat to moorings, which became a desperate paddle when we started drifting towards the rocks, we rigged the sails and immediately accelerated away. Bateleur likes to sit flat and notably accelerate in the lightest of wind puffs. A forced capsized showed how stable she is and how literally effortless to bring her back. Sailing the Didi 15, I just want to go again. Cant wait to see her in stronger breeze. In summary...I need one.

"Bateleur" returning to ABYC with a very happy crew.

Jim will keep us up to date with his testing and fine-tuning over the next few weeks. I hope that we will also get to see some photos and videos in stronger winds as Jim and "Bateleur" grow to know each other.

The top photo of this post shows the hull shape very nicely. For those who have not followed my posts about the build, this is a plywood boat although it doesnt look like one. It is the smallest in our radius chine plywood Didi design range. The hull is the same family as the Didi Mini Mk3 and Didi 950, with topside chine above a radius chine underbody.

It can be built from plans only, plans and patterns or plans and a CNC kit. See more info about all of our designs on our website at http://dixdesign.com/

Do you find information about Boat Plans Arch Davis are you looking for? If not, below may help you find more information about the Boat Plans Arch Davis. Thank you for visiting, have a great day.

Read More..

Boat Plans Aluminium | Long Distance in a Bigger Boat

Boat Plans Aluminium

My last post was about people going long distance in small boats and most of my readers know that I am soon to go long distance in a slightly bigger boat. This will be on the Didi 38 "Black Cat".

She is well on the way to being ready, with smaller items like installation of new electronics going on and the major still outstanding items being to tune the rig and test the new sails (which have still to be delivered). She is looking awesome, after a full repaint and new graphics. This 18-year old lady is looking young again.

"Black Cat" with her new paint & graphics.

Preparation of "Black Cat" for her next adventure has been a lengthy process but a worthwhile one. It was unfortunately extended by 2 weeks due to damage sustained at Royal Cape Yacht Club during a gale just after she was relaunched when the repaint had been completed. Cape Town is well known for furious winds and this one apparently gusted to 75 knots in the yacht basin. Some mooring chains holding the marinas broke and "Black Cat" was in the unfortunate position of serving as the meat in a steel sandwich, not good for a plywood boat.

My navigator for this race is Dave Immelman, nicknamed Wavy. Dave has been in charge of the preparations and has done a great job of it. That includes getting the extra work done that resulted from poor "Black Cat" getting squeezed tighter than any lady in a corset. She has been freed, repaired, repainted (again), given the OK by the doctor (scrutineer) and is raring to go.

New Cat logo on port side. Starboard has the butt end.

 This is a boys adventure on which we are embarking. As in 1996 and 2000, "Black Cat" will be the only lady enjoying it with us. That said, we would not be doing it without the support of the other ladies in the lives of all of the crew, namely wives, mothers, daughters and others. They tolerate our passion for boats, adventures and ocean crossings. Maybe some of them look forward to our departure to get us out of their hair, I dont know. I do know that they will be happy to see us again when we return and we will be equally happy to be greeted by them when our adventure is over. We will return home with another big drawer full of images in our memory banks, memories that cannot be equalled by any travel documentary or computer game, no-matter how good the filming or graphics may be.

For those who have never experienced this, it is a big one to add to your bucket list. Having done it 3 times before, I can say that it will take a big bucket if it is to hold other items that are bigger than this one. But you have to have a strong sense of adventure and not be easily scared. If you dont have those qualities you will be petrified at times, incapacitated by sheer terror while your shipmates are enjoying a great roller coaster ride that goes on for 2-4 weeks (depending on the speed of your chosen boat), with no chance of getting off the ride.

We have sailed this boat very hard in the past and the new go-fast goodies on her will help us to do so again. We sail her safely but we do so sometimes at very high speed, with lots of spray flying by and mixed in with flying fish, squid, albatross  and even the occasional sword fish. "The Cat" enjoys it and allows us to enjoy it with her.



Do you find information about Boat Plans Aluminium are you looking for? If not, below may help you find more information about the Boat Plans Aluminium. Thank you for visiting, have a great day.

Read More..

Dinghy Boat Plans | Hull Turning Methods

Dinghy Boat Plans

I have shown a few projects in this blog over the past few months with the hulls being turned using different methods. The bigger the boat the more critical this operation is. The risks of damage to property and injury to people increase exponentially as the boat becomes more bulky and increases in weight. Imagine the difference between turning over a plywood hull that is 6.4m (21ft) long, 2.4m (710") wide, 1.2mm (311") deep and weighing 200kg (440lb) or a 50% scaled up version of the same hull. At 9.6m (316") long, 3.6m (1110") beam and 1.8m (511") deep, it will weigh 675kg (1488lb).

It has only increased 50% in all directions but the weight is more than 3x that of the smaller boat. The bulk becomes more difficult to manage and the weight to lift and lower becomes a major factor. If, at the same time as increasing the size, you also change to steel as the construction material, that same size hull could weigh 2500-2750kg (5500-6000lb). Now you are talking about some serious loads that can get out of control, yet the boat is still only 50% bigger in each direction.

Those smaller projects are easily turned over by hand, with friends and neighbours supplying the motive power and the boat having a soft landing on tyres or some other cushioning material. Years ago a client of mine in South Africa turned his 32ft hull by himself. He jacked it up on one side until it reached the balance point, then let gravity take it the rest of the way. It fell against a young tree, then slid down the tree and came to rest flat on the ground. Luckily his hull was relatively undamaged but the tree didnt survive the experience.

There are many ways to turn a hull but that is not one of them. I have a whole chapter on this subject in my book "Shaped by Wind and Wave", to give guidance on how to safely turn your hull. The two Didi 950 hulls that were turned recently in USA and Australia both used the spit-roast method. For each of my own big boats I have used a chain block to do the work, another of the methods explained in the book.

Turning the 38ft "Black Cat" using a chain block on a scaffold tower.

The book can be ordered either as a paperback or as digital for reading on whatever screen device suits you.

To see our range of designs, go to http://dixdesign.com/.

Do you find information about Dinghy Boat Plans are you looking for? If not, below may help you find more information about the Dinghy Boat Plans. Thank you for visiting, have a great day.

Read More..

Boat Plans Canada | Didi 950 Build Started

Boat Plans Canada

Michael Vermeersch of Ohio commissioned the Didi 950 design and has now started construction of his boat. He is building from a pre-cut plywood kit that was supplied by Chesapeake Light Craft in Annapolis. The kit arrived as 61 sheets of plywood with all components accurately cut by CNC router and packed on 2 pallets.

Michael reports that he is progressing well with the assembly of the backbone and bulkheads and that everything is fitting together beautifully. A few more bulkheads to go, then he will be ready to start setting up on the building stocks.

Michael with wife Pat & daughter Catherine.

Since adding this design to our stock design list, another three boats have been started. They are in Australia, Greece and Latvia.

The Didi 950 is drawn to the Class 950 Rule and detailed for building by the radius chine plywood construction method. It can be built from plans only or from a kit. Kits are currently available in USA but can be supplied by most of our international kit suppliers as well. Enquire with the supplier in your area and I will send the files to them for pricing. Note that for USA you must order from us, you cannot order it directly from Chesapeake Light Craft.

For our full range of designs, please visit http://dixdesign.com/.

Do you find information about Boat Plans Canada are you looking for? If not, below may help you find more information about the Boat Plans Canada. Thank you for visiting, have a great day.

Read More..

Boat Plans Aluminium | Kevins Garvey Progress

Boat Plans Aluminium

I wrote in January about the 16ft plywood garvey being built by Kevin Agee. Kevin is progressing nicely and benefitting from the very welcome spring that has finally arrived and eased out the rather brutal winter. Now it is easier to do woodwork and epoxy cures much faster, so work progresses more quickly. Epoxy coatings in the sealed spaces are being completed and this weekend the deck will be glued on.

Hull skin completed, interior details being fitted.

Supports for battery box and fuel tank.

Deck stringers going in, test fitting of fuel tank.

Bottom runners serve as stringers and bottom protection.

Dry-fitting deck, ahead of final installation this weekend.

Kevin Agee is doing a nice job of his project and will display it in the "I Built It Myself" section of the Wooden Boat Show at Mystic Seaport at the end of June. If you want to see this boat, that will be the place to do it.

Plans are not yet ready for selling but should be in a month or two. We will offer it as plans and instructions, with options of full-size patterns or a pre-cut plywood kit.

To see our designs for your next amateur project, please visit our website at http://dixdesign.com .


Do you find information about Boat Plans Aluminium are you looking for? If not, below may help you find more information about the Boat Plans Aluminium. Thank you for visiting, have a great day.

Read More..

Wood Boat Plans And Kits | Cape Cutter 19 Launch in Cape Town

Wood Boat Plans And Kits

Nick Kulenkampff, of Cape Town, bought plans from us in November 2013 for the Cape Cutter 19, to be built in lapstrake plywood. I only received one question from him and that was on choice of plywood for the build. A few days ago I received another email from him, with launch photos attached. He launched his boat, named "Mimi", at Royal Cape Yacht Club, in February.

In his email, Nick said "thank you for a beautiful design and also for a set of plans that were spot on. I thoroughly enjoyed the entire process." From the photos it appears that he made a pretty good job of the build, which was also quicker than most at about 15 months.

This boat is available in GRP from Cape Cutter Yachts in UK. It is the smaller sister to our popular Cape Henry 21 design.

Here are some of Nicks build photos, with explanations

Making bulkheads. These are cut from full-size Mylar patterns, included in the plans.

Transom, laminated from multiple layers of plywood.

Bulkheads and transom set up on building stocks.

Bottom skin going on. Plenty of clamps needed.

Bilge panel gong on. Keel deadwood and wood bilge keels fitted. This bilge keel is to protect the hull when aground, serving purely as a support to keep the hull skin clear of pebbles.

Forward bottom panel. Fitting this panel is the most difficult part of the build, due to the amount of twist in the panel. The twist is what forms the fine bow for good performance.

Hull epoxy-coated, primed and ready for paint.

Building the cockpit. Nicks work is very neat.

Interior, looking forward, built  before fitting the deck.

Interior, looking aft. Painting in progress.

Deck stringers glued into pre-cut slots

Painted and brightwork being done. Almost ready to get wet.

This view shows why these little boats are so quick. That fine bow works vvery well.

Launch day. The yellow boat below the bow is "Black Cat", the Didi 38 that I built.

Afloat and waiting for her rig to be set up.

Thank you, Nick, for the set of photos. She looks good and I am sure you will have many good times sailing her.

To see more of this and out other designs, visit http://dixdesign.com/.

Do you find information about Wood Boat Plans And Kits are you looking for? If not, below may help you find more information about the Wood Boat Plans And Kits. Thank you for visiting, have a great day.

Read More..