Tampilkan postingan dengan label dont. Tampilkan semua postingan
Tampilkan postingan dengan label dont. Tampilkan semua postingan

Boat Plans Building | Dont Get Scammed

| 0 komentar |

Boat Plans Building


The Internet has now become the way that most of us keep in contact with our friends and family, no-matter how far apart we are. There are few places left in the world that we are unreachable by this web of fibre optics, wires, electrical pulses and radio waves that digitally  brings so much convenience to our lives. Even in the middle of the ocean or on top of the highest of mountain peaks we are able to connect to anywhere else in the world, as long as we have the right equipment and the power source to energise it.

Even 10 years ago most people had some doubts about doing business on-line, mainly over the safety of sending money to companies via the Internet and concerns about the ethics of business people in foreign lands. Those doubts have gradually faded and it is now common to pay for international transactions via the web. It is much simpler and normally cheaper to pay by credit card than to do a wire transfer between banks.

I must say that Americans are generally more reluctant to deal with foreign Internet companies than are people from other countries, preferring to buy from American sources. Even with that self-imposed limitation, Internet transactions continue to grow exponentially in USA as much as elsewhere.

Most businesses that trade on the Internet want to expand their markets and build long-term growth amid ever-increasing competition. To do this they must prove that they are trustworthy and build a good reputation. After they have been around for a few years they will have a base of support from people who have had a good experience and will help to spread the good vibes about them.

Occasionally we all come across a really bad company that exists only to rip off their customers for profit, or we have a very bad experience with the item not being up to the marketing hype that enticed us to buy it. Such an experience tends to colour our attitudes toward future dealings. If it was a small item we may shrug it off and just not do business with them again. If it was a considerable amount of money then we should do what we can to spread the word, to cut that companys market share down to what they deserve. Such companies take away business from those that do trade fairly, in the process reducing their profitability.

A client of mine in Australia, building a Didi 950, recently ran foul of a scammer when searching for an engine at a good price. He sourced a Yanmar 3YM30 inboard diesel motor with saildrive for about half the price of buying the same package from other suppliers. The supplier, Inbond Limited (also known as Inboard Limited) was ostensibly a Canadian company, based in Calgary, Alberta but selling through the Chinese on-line gateway Alibaba. Note that this is not the British logistical company InBond, which is a legitimate company.

This scam became deeper and more complicated as time passed, eventually including a fake shipping company as well, that was going to transport the purchase by air. A fake supplier shipping a non-existent engine via a fake transport company; the only realities in the chain were the buyer and his hard-earned cash.

It is very easy to be wise after the fact but most of us look for the lowest price that we can find when shopping, whether for large or small items. When we can save as much as a few thousand dollars on an item then it is even more enticing, tough to resist. But, the bigger the saving the more wary we need to be. We know the old saying, "If it seems too good to be true then it probably is". A price that low indicates that it is likely an item that has "fallen off the back of a truck". This is South African terminology for "stolen". If not stolen then it may be a fake copy or doesnt exist at all.

Alibaba is a reputable gateway doing transactions for many, many millions. However, this company Inbond Limited was unverified by Alibaba, noted at top left of the company listing. That means that Alibaba cannot vouch for the supplier and that you havent any chance of a refund from their payment system. If you buy through Alibaba make sure that the supplier is verified, so that you have the full backing of Alibaba if things dont go the way that you planned.

Look out for other clues as well. There are errors in the product listings, for example they call it a gasoline engine instead of a diesel engine. A reputable supplier is unlikely to make such an error.

Once we were aware of this scam it developed into a lengthy discussion on Facebook. If you want to read it, go to my Facebook page and scroll down to January 12th 2015. A Google search showed that the premises where they were supposed to be located are actually occupied by a signage company.

Realising that the buyer had become aware of his scam and refused to send more money, the scammer sent a shipping notice with tracking number and said that shipment was waiting only on the shipping payment. It all looked very authentic until we dug deeper. The tracking number even pulled up a form with all the right details on it. But, there was no way to contact the shipping company, Highonshore, except through their on-line contact form; no telephone, no fax, no email and no physical address. Claiming to be a long-established UK company, there was no record of the directors named and described on their About Us page when I did a web search of British company directors. Their website looks very impressive but has no real substance and is full of grammatical errors, written by someone who does not have English as their first language.

Now the Highonshore website has gone dead. Registration details for the domain show that it was only registered in mid-December, by someone in New Hampshire So much for the long-established British shipping company.

The buyer also had someone dig deeper into Inbond Limited and found that it isnt a Canadian company at all. The payment was deposited into a California banks but the scam is run by a Russian. The Internet helps us all, whether we are good or bad people.

The point of this post is not to discourage you from doing business on-line, it is to ask you to please be careful. And please, please please dont do business with Inbond Limited, Inboard Limited or Highonshore. Please also spread the word about these ripoff artists and their scam.



Do you find information about Boat Plans Building are you looking for? If not, below may help you find more information about the Boat Plans Building. Thank you for visiting, have a great day.
Read More..

Boden Boat Plans Australia | Wickedly Accurate Didi 29 Retro Project in North Carolina

| 0 komentar |

Boden Boat Plans Australia


I designed the Didi 29 Retro for Mike Kopman, a professional charter skipper who lives in my hometown of Hout Bay, South Africa. Mikes concept was to adapt the Didi 26 cruiser/racer design to a more traditional concept, with counter stern, bulwarks, boxy trunk cabin and a big gaff rig, for participation in the Caribbean classic racing circuit. Mike received the first CNC kit to this design, supplied by CKD Boats in South Africa. The second kit went to Bruce Mierke of Murphy, North Carolina, which he ordered from our list of plywood kits.

Mike Kopman has been building his workshop ahead of the boatbuilding project, so that hasnt started yet. Bruce Mierke started his boat a few months ago and is moving along very well. These photos are of Bruces build. He began with some smaller items ahead of starting the hull, so I am showing those first.
Rudder
Foil of lifting keel
Beaver-tail ballast bulb
Carbon spars for gaff rig.
Bulkheads and framework set up on building stocks.
This design has a spade rudder that is installed in a cassette so that it can be lifted out through the cockpit for trailing or shallow moorings. Bruce has added a motor well also, in which he will run a Torqueedo electric outboard. The casings that contain the outboard well and rudder cassette can be seen on the photo above and others in this series.
Bottom panels installed, rudder cassette and Torqueedo test-fitted
Radiused section of skin completed.
Aft view, with hardwood-veneered transom
Plug of engine well and rudder cassette in place.
Bruce has modified my rudder cassette design to allow some steerage with the rudder partially raised to assist when approaching shallow moorings with the keel raised.

He is very happy with the quality and accuracy of the kit that we supplied, describing it as "wicked accurate".

For info on our full range of designs, please visit http://dixdesign.com/


Do you find information about Boden Boat Plans Australia are you looking for? If not, below may help you find more information about the Boden Boat Plans Australia. Thank you for visiting, have a great day.
Read More..

Wooden Boat Plans Australia | Argie 15 People Carrier

| 0 komentar |

Wooden Boat Plans Australia


I have written here before about the versatility of the Argie 15. This week I watched a video posted on YouTube by Ă–zden O?ul, of two couples sailing an amateur-built Argie 15 in Turkey. Normally a 15ft dinghy with four adults aboard is full to the brim with people. This video really brings home the size and comfort of this dinghy as a family fun boat. The winds are light, yet even with this load it is moving along very nicely, with plenty of freeboard to take more.

The crew are spread out in the boat, with one even right up in the bow where you dont normally have someone sit on a boat of this size. It accepts this and carries on sailing. This video highlights how much space there is in this boat.


The Argie 15 is a great camp-cruiser, with a good turn of speed. That also makes it a nice raid boat, capable of taking rough water and covering extended distances.

For more info on this and out other designs, please visit http://dixdesign.com/.

Do you find information about Wooden Boat Plans Australia are you looking for? If not, below may help you find more information about the Wooden Boat Plans Australia. Thank you for visiting, have a great day.
Read More..

Wooden Boat Plans And Kits | Dont Underload Your Diesel Engine

| 0 komentar |

Wooden Boat Plans And Kits


I have been around boats with diesel engines for more than 40 years. In that time I have heard many times that we should not run a diesel engine under light loads for long periods because "it can glaze the cylinders". Another statement has been "diesel engines like to be loaded". Maybe you have also been told or read this but do you really understand what is going on with your diesel, why it is so important to run it with healthy loads and why you should not over-power your boat?
turbine wheel
A turbo charger turbine wheel fouled with soot and fuel, the result of chronic underloading. This gunge also fouls your upper cylinders, exhaust valves and exhaust system. From there it is washed out with the cooling water into the water on which you enjoy your boating. Photo courtesy of Steve DAntonio.

I am a proponent of reasonable size motors in sailboats but often deal with owners who want to put much bigger motors in their boats than I recommend. My 36ft boat had 20hp, my 34 had 12hp and my 38 footer had 18hp. That 12hp could push my boat against a 40 knot wind on flat water. Sure, it was slow progress and the motor was working very hard but it could do it. In less extreme conditions the motor wasnt just ticking over to move her at reasonable speed. A 20hp motor would still be acceptable on that boat but anything bigger would be over-powering it.

Professional Boatbuilder magazine has an enlightening article on this subject on their website, written by their technical editor Steve DAntonio. Steve also works with owners and builders through his own business, Steve DAntonio Marine Consulting, Inc.
cross hatch
The grooves that retain oil in a cylinder wall, known as crosshatch, can be seen here. Frequent light load operation can wear away this pattern; known as cylinder glazing, it exacerbates blow-by and the issues that accompany it. Photo courtesy of Steve DAntonio.
I dont want to repeat here what Steve writes about so clearly in his article, just to point out again that you do harm to your motor, to your bank account and to the environment by over-powering your boat, which inevitably results in you running your motor at speeds that will cause problems. Those problems wont only materialise "in the long run", they can start to appear when the motor has run for no more than a few thousand hours. You will be inviting self-inflicted pain and heartache on yourself and future owners of the boat.

Please read Steves article. And for info on my designs, please visit http://dixdesign.com.

Do you find information about Wooden Boat Plans And Kits are you looking for? If not, below may help you find more information about the Wooden Boat Plans And Kits. Thank you for visiting, have a great day.
Read More..