Boat Building Plans And Kits | Anthony Steward Around Alone in an Open Boat

Boat Building Plans And Kits

More than 20 years ago Anthony Steward sailed around the world on a tiny open boat. He took the mould plug from my TLC 19 trailer-sailer and turned it into a boat to circum-navigate the world. Nobody had done it before him and nobody has done it since.

Ant Stewards little boat shipwrecked in the Seychelles

Anthony has always been very modest about his achievement and has done very little to publicise it. Most of the publicity that it has received has been through articles that I have written for magazines, the article on my website and his chapter in my book "Shaped by Wind & Wave".

I am pleased to see that this has now changed. A video that was made 20 years ago, documenting his voyage, is now on YouTube. It is worth the 30 minutes to watch it, to understand just how tough this voyage was.

Anthony modified my little boat extensively to serve the purpose that he needed. We have many designs to take you more comfortably around the world or just to take you across your local pond. Please visit http://dixdesign.com/.

Do you find information about Boat Building Plans And Kits are you looking for? If not, below may help you find more information about the Boat Building Plans And Kits. Thank you for visiting, have a great day.

Read More..

Wooden Boat Plans Australia | Argie 15 People Carrier

Wooden Boat Plans Australia

I have written here before about the versatility of the Argie 15. This week I watched a video posted on YouTube by Özden O?ul, of two couples sailing an amateur-built Argie 15 in Turkey. Normally a 15ft dinghy with four adults aboard is full to the brim with people. This video really brings home the size and comfort of this dinghy as a family fun boat. The winds are light, yet even with this load it is moving along very nicely, with plenty of freeboard to take more.

The crew are spread out in the boat, with one even right up in the bow where you dont normally have someone sit on a boat of this size. It accepts this and carries on sailing. This video highlights how much space there is in this boat.

The Argie 15 is a great camp-cruiser, with a good turn of speed. That also makes it a nice raid boat, capable of taking rough water and covering extended distances.

For more info on this and out other designs, please visit http://dixdesign.com/.

Do you find information about Wooden Boat Plans Australia are you looking for? If not, below may help you find more information about the Wooden Boat Plans Australia. Thank you for visiting, have a great day.

Read More..

Boat Plans Bruce Roberts | Sailing model boat making your own keel bulb

Boat Plans Bruce Roberts

From: "Jim Adams"

I made a plug from balsa and finished it to a smooth finish.
Using two aluminum pans (the kind that you throw away). Fill the first one with plaster took the balsa-bulb (well waxed) and placed it in the plaster half way in. I used two pins through the center to hold it down.

Let the plaster harden, then pull out the balsa-plug. Next put thin saran wrap over the mold and place the balsa-plug back in the mold. Now comes the fun part I used rubber bands to hold the plug in place (remember I had two pins that extend past the mold walls). Fill the second pan with plaster and lay the first on top, it is kind of messy but it works. When the second half hardens (about two hours) pull them apart. You will need to plug the holes at the ends on the sides and create small air path upward in the and a spur (looks like a funnel when you are done this needs to be big enough to pour in the lead) at the end.

==
Pouring molten lead is dangerous. The plaster mold which Jim Describes must be absoultely dry and free of moisture or the lead can spray out ot the spur.

Do you find information about Boat Plans Bruce Roberts are you looking for? If not, below may help you find more information about the Boat Plans Bruce Roberts. Thank you for visiting, have a great day.

Read More..

Wooden Boat Plans And Kits | Dont Underload Your Diesel Engine

Wooden Boat Plans And Kits

I have been around boats with diesel engines for more than 40 years. In that time I have heard many times that we should not run a diesel engine under light loads for long periods because "it can glaze the cylinders". Another statement has been "diesel engines like to be loaded". Maybe you have also been told or read this but do you really understand what is going on with your diesel, why it is so important to run it with healthy loads and why you should not over-power your boat?

A turbo charger turbine wheel fouled with soot and fuel, the result of chronic underloading. This gunge also fouls your upper cylinders, exhaust valves and exhaust system. From there it is washed out with the cooling water into the water on which you enjoy your boating. Photo courtesy of Steve DAntonio.

I am a proponent of reasonable size motors in sailboats but often deal with owners who want to put much bigger motors in their boats than I recommend. My 36ft boat had 20hp, my 34 had 12hp and my 38 footer had 18hp. That 12hp could push my boat against a 40 knot wind on flat water. Sure, it was slow progress and the motor was working very hard but it could do it. In less extreme conditions the motor wasnt just ticking over to move her at reasonable speed. A 20hp motor would still be acceptable on that boat but anything bigger would be over-powering it.

Professional Boatbuilder magazine has an enlightening article on this subject on their website, written by their technical editor Steve DAntonio. Steve also works with owners and builders through his own business, Steve DAntonio Marine Consulting, Inc.

The grooves that retain oil in a cylinder wall, known as crosshatch, can be seen here. Frequent light load operation can wear away this pattern; known as cylinder glazing, it exacerbates blow-by and the issues that accompany it. Photo courtesy of Steve DAntonio.

I dont want to repeat here what Steve writes about so clearly in his article, just to point out again that you do harm to your motor, to your bank account and to the environment by over-powering your boat, which inevitably results in you running your motor at speeds that will cause problems. Those problems wont only materialise "in the long run", they can start to appear when the motor has run for no more than a few thousand hours. You will be inviting self-inflicted pain and heartache on yourself and future owners of the boat.

Please read Steves article. And for info on my designs, please visit http://dixdesign.com.

Do you find information about Wooden Boat Plans And Kits are you looking for? If not, below may help you find more information about the Wooden Boat Plans And Kits. Thank you for visiting, have a great day.

Read More..

Boat Designs And Plans | Radius Chine Plywood Class 950

Boat Designs And Plans

The Didi 950 is our newest design and the plans are now nearing completion. They show a very modern boat that is designed to comply with the Class 950 Rules and which can be built by any reasonably competent amateur woodworker.

Sail plan of Didi 950

The Class 950 Rule produces a fast boat that is great for level boat-for-boat racing. The rule results in reasonable proportions and features, for a safe and strong boat with comfortable accommodation that is also good for a performance cruiser.

Class 950 accommodation

Construction is radius chine plywood with a hard chine aft in the topsides. This format produces a very modern hull that is built mostly from a very low-tech sheet material, yet looks as good as any moulded composite boat that can only be built with skills that most amateurs dont have. Most men are comfortable working with wood and this construction method allows them to use those skills to build a competitive boat.

3D Profile of Didi 950

The more that I look at this boat the more that I would like to be on it for offshore or ocean racing. This would be a great boat for sailing trans-Atlantic in the Cape to Rio Race or going across the Pacific in the Trans-Pac Race. Close-reaching to broad-reaching under asymmetrical and powered up by water ballast tanks, she will be a thrilling boat, reeling off the miles like few others in this size range can do.

3D View with contours to highlight hull shape.

Someone close by, please build one of these boats. I need to sail on this one.

For more info go to http://dixdesign.com/didi950.htm and visit our website at http://dixdesign.com/ to see our other designs.

Do you find information about Boat Designs And Plans are you looking for? If not, below may help you find more information about the Boat Designs And Plans. Thank you for visiting, have a great day.

Read More..

Plywood Boat Plans Australia | Get your Orders to us Early

Plywood Boat Plans Australia

The end of 2013 is coming fast. We normally have a rush of orders around year-end but this year it is going to be different. Remember, I will be sailing in the Cape to Rio Race and that is going to create considerable disruption in delivery of orders. I will fly out on December 14th, via Istanbul in Turkey to Cape Town, South Africa. After sailing across the South Atlantic, I will return home from Rio de Janeiro, Brazil, about the first week of February 2014.

Dehlia is the person who glues this operation together. She is my wife and she receives the orders, processes the payments, prints the drawings and magically sends them all over the world, allowing me to spend my time drawing pretty pictures of boats and backing up you, our builders. Normally Dehlia would continue unflustered while I am away playing boats. This time it will be different, Dehlia is also going to Cape Town, to wave goodbye tearfully from the dock. She will leave our home and office before I do, on 3rd December. She will not be back to resume business until 14th January 2014. For a month there will be nobody here to print drawings.

Please dont leave your order until the last minute, we may not be able to supply. This is even more important if you intend to order a plywood kit to build one of our boats. It takes more time to set up a kit order than only to supply plans.

We hope to set up systems to take orders while away, for items that can be supplied by email. That will be for our 3:1 dinghies, study packs and eBook "Shaped by Wind & Wave". Paper orders will have to wait until after Dehlia returns 14th January.

Please send your orders by 29th November. After Dehlia leaves I will be able to process and supply only limited orders.

Thank you for your support both past and future. I apologise for any convenience that this disruption may cause you, we will be back as soon as possible.

Go to http://dixdesign.com/ to see our full range of designs.

Do you find information about Plywood Boat Plans Australia are you looking for? If not, below may help you find more information about the Plywood Boat Plans Australia. Thank you for visiting, have a great day.

Read More..