Boat Plans Bolger | New Plywood Garvey Design

Boat Plans Bolger

I have been working intermittently on a new 16ft design for awhile, the start of a range of small powerboats for protected water use. The design is still a way off being complete but the prototype is already being built by Kevin Agee in Hampton, Virginia and is progressing well.

I am using a garvey-type hull that can be easily built from either plywood or aluminium. It has Veed sections forward to soften the ride in a bit of a chop, with twisted bottom panels that run out to a shallow V at the transom for easy planing.

The version that Kevin is building has a self-draining wet deck with swivel seats on bases bolted to the deck. It has integral floodable tanks under the deck to hold bait and catch.There will also be a "sit-inside" version with bench seats, with the tanks under the seats.

Kevin is building from okoume plywood, cut from full-size paper patterns that we have supplied. When the design is complete then we will also offer plywood kits, cut by CNC machine. The photos below show the basics of construction as far as it has gone to date.

Bottom panels with slots for bulkhead tabs

Glass-taping joints in panels.

Bottom panels stitched together & bulkheads set up

Sides added and stitched to bottom

Foredeck added and stitched in.

Turned over and laid flat, ready to epoxy seams.

Now Kevin is doing the epoxy bonding of the chines and centreline joint with filled epoxy, prior to removing the copper wire ties, then glass-taping.

This design will be added to our design list in a few months when the plans are complete. See our current design list at http://dixdesign.com/priceabr.htm.

Do you find information about Boat Plans Bolger are you looking for? If not, below may help you find more information about the Boat Plans Bolger. Thank you for visiting, have a great day.

Read More..

Boat Trailer Plans Australia | Cape Cutter 19 Capable Little Cruiser

Boat Trailer Plans Australia

The Cape Cutter 19 was commissioned by Nick and Lyndsay Voorhoeve as a GRP trailer-sailer, styled after the traditional working craft of UK. It was first built in South Africa, then the company was sold to Honnor Marine, who have built them in UK since 2003. To date more than 125 GRP boats have been built and we have also sold plans for nearly 70 of them, to be built from plywood.

These little boats have proven to be very capable little cruisers, with a surprising turn of speed. They have won the modern gaffer division of the Round the Island Race (around the Isle of Wight) a number of times. I designed the CC19 to handle the boisterous seas and winds found around the Cape of Good Hope, so it has proven quite at home in the sometimes rough conditions around the Solent.

Most are used for family cruising but some have made interesting passages. Top of the list must be the voyage that Jo Sinfield made on "Bandoola". She was built for him in Cape Town in 2002, then shipped to Myanmar (previously Burma), 1000 miles up the Irrawaddy River. Jo sailed her down the Irrawaddy River to the Bay of Bengal, across the Andaman Sea to Thailand then to Singapore.

Jo Sinfield and "Bandoola" sailing the Irrawaddy River in Myanmar.

Another remarkable journey was the fund-raising voyage that Mike Brooke made with his CC19 "Theos Future", to raise funds for research and treatment of a congenital eye disease. Mike is an ex Royal Marine and highly experienced dinghy sailor. He circumnavigated England in June to September 2008, with a variety of friends and family crewing for him on various legs. He raised more than his target and was able to buy important hi-tech equipment for treatment of the condition. Theo is Mikes nephew, who was born healthy but lost his sight to the condition within months. Mike continues to raise funds by selling his book about the voyage, "Fight for Sight on Theos Future - A Voyage of Hope & Endeavour". If you want to read his story and support this very worthwhile cause, you can buy his book at http://www.theosfuture.org/.

Mike Brooke sailing "Theos Future"

I have just read of another voyage by a CC19. This was a circumnavigation of UK, made by David Farquhar on CC19 #11, "Pipistrelle". David didnt intend to circumnavigate, he set off for a few days of sailing to see how his boat went, then just kept going. He harbour-hopped and spread it over a three-year period before arriving back at his starting point. David is now part-way through doing the same again and estimates that to date he has sailed about 4000 miles on his little ship.

David Farquhar and crew Fiona on CC19 Pipistrelle

These very capable little boats have wonderful character and are well-loved by their owners. It will be interesting to see where else their owners may take them (or be taken by them).

To see more of this and our other designs, please visit http://dixdesign.com/.

Do you find information about Boat Trailer Plans Australia are you looking for? If not, below may help you find more information about the Boat Trailer Plans Australia. Thank you for visiting, have a great day.

Read More..

Boat Plans Australia | Wooden Boat Show

Boat Plans Australia

Summer heat is setting in and minds are turning to activities that can keep us cool. Time for us to get out on the water and go boating.

Time also for the Wooden Boat Show, which takes us north on a 500 mile road trip from the rapidly over-heating Virginia to the somewhat cooler climes of New England, more particularly the very beautiful Mystic Seaport. I must admit that in June/July I think that part of Connecticut must be a great place to live. Then I think about how much I dislike the (much milder) cold of a Virginia winter and know that I was built for much more tropical places.

The Wooden Boat Show  will be 26-28 June and we will once again be exhibiting our bright yellow Paper Jet prototype. Close by, in the "I Built It Myself" section, will be the prototype of our new 16ft garvey design. This is "Inlet Runner", exhibited by amateur builder Kevin Agee of Hampton, Virginia. He is working long hours into the night to get it finished in time for the show. It will be showing off its very fresh paint job. Never having built a boat of any size or type before, he has surprised himself with the high standard of work that he has achieved.

Kevin Agees "Inlet Runner" 16ft garvey nearing completion.

We are also using this opportunity to do the official launch of my new book "South Atlantic Capsize - Lessons Taught by a Big Ocean Wave". We will have copies on hand at a special show price and you may be able to pin me down long enough to sign your copy. Special show price only to those who visit us at the show.

To see more about our boat designs, please visit our main website or our new mobile website.

Do you find information about Boat Plans Australia are you looking for? If not, below may help you find more information about the Boat Plans Australia. Thank you for visiting, have a great day.

Read More..

Boat Plans Aluminium | Kevins Garvey Progress

Boat Plans Aluminium

I wrote in January about the 16ft plywood garvey being built by Kevin Agee. Kevin is progressing nicely and benefitting from the very welcome spring that has finally arrived and eased out the rather brutal winter. Now it is easier to do woodwork and epoxy cures much faster, so work progresses more quickly. Epoxy coatings in the sealed spaces are being completed and this weekend the deck will be glued on.

Hull skin completed, interior details being fitted.

Supports for battery box and fuel tank.

Deck stringers going in, test fitting of fuel tank.

Bottom runners serve as stringers and bottom protection.

Dry-fitting deck, ahead of final installation this weekend.

Kevin Agee is doing a nice job of his project and will display it in the "I Built It Myself" section of the Wooden Boat Show at Mystic Seaport at the end of June. If you want to see this boat, that will be the place to do it.

Plans are not yet ready for selling but should be in a month or two. We will offer it as plans and instructions, with options of full-size patterns or a pre-cut plywood kit.

To see our designs for your next amateur project, please visit our website at http://dixdesign.com .


Do you find information about Boat Plans Aluminium are you looking for? If not, below may help you find more information about the Boat Plans Aluminium. Thank you for visiting, have a great day.

Read More..