Tampilkan postingan dengan label by. Tampilkan semua postingan
Tampilkan postingan dengan label by. Tampilkan semua postingan

Boat Plans Building | Americas Cup Race 13 1st Edition

| 0 komentar |

Boat Plans Building


I want to take issue with what has been widely reported on the web about the Americas Cup racing on Friday afternoon last week. That was when Race 13 was run, abandoned then run for a second time.

A syndicated report written by Scott Neuman has appeared on thousands of websites and tells an entirely inaccurate story. It says:-

"They were helped along somewhat by the vagaries of the wind off San Francisco — its been alternately too light or too strong. On Friday in a light-air race, New Zealand crossed the line ahead of USA, but it took them just over 40 minutes, which the race rules said was too long. So the result was thrown out and the defenders lived to sail again."

Either the author was not watching the race himself and published incorrect information supplied by someone else or he didnt understand what he was watching.

I might rile up people who are rooting for Emirates Team NZ but I like to read the truth, whichever side I am supporting. It behoves journalists to publish the truth, not what they want or someone else wants them to say, for whatever reason. Inaccuracies in journalistic reporting become truth in the future unless they are corrected at the time or soon after. This is especially true in the Internet era because what goes onto the Internet will stay on the Internet until there is no longer an Internet (forever? until the end of the world? Who knows?)

In this case the report says that NZ won the race and then the result was thrown out because the race took too long. Absolute nonsense.

Emirates NZ was well ahead at the time that the race was abandoned but they were nowhere near to the finish line. I cant be sure of their exact position when time ran out but I think that they were into the green circle and about to round the last mark when the abandon call came from the race officer. They still had the last leg to sail. There was no result, so how can the result have been thrown out?

You may say that this is pure semantics and it makes no difference. But it does, it makes a very big difference. Emirates Team NZ only needed to win one more race to take the cup back to New Zealand and that was the race that they needed. The report says that they won that race then it was taken away due to the time limit. That is equivalent to saying that they won the cup then it was taken away from them. If the time limit had been 45 minutes instead of 40 minutes then they would have won the race and the cup, no dispute. The fact is that they didnt finish or win that race and didnt win the cup on that day.

Most yacht races have time limits, as do most other sporting events in the world. The 40 minute time limit is one of the many rules of the event. The race committee cannot increase or decrease this limit at whim. You can be sure that the crews of both boats knew long before they even reached the weather mark that there was a good chance that the race would be abandoned for exceeding the allotted 40 minutes, unless the wind increased considerably. The commentators were already talking about it half-way up leg 3 and I am sure that the crews of both boats were watching their very accurate timepieces all the way through. All racing sailors know that in very light breezes there is a chance of missing the time limit so we keep it in mind, we watch the clock and estimate or calculate the speed needed due to the time and distance to go to the finish. We didnt see any looks of astonishment among the crew when the race was abandoned, they knew that they would not finish in time to get a result.

The fact is that the non-completion of that race has forever changed the Americas Cup history from what would have been if the race had been completed. AC34 has dramatically changed from what was a hiding being handed out to Oracle Team USA by Emirates Team New Zealand to what is now an extremely thrilling spectacle, with one of the biggest comebacks ever seen in any sport in the world. With 5 straight wins in races 13 to 17 instead of the final loss that appeared inevitable for race 13, we now have some seriously competitive racing taking place.

By this evening Emirates Team New Zealand may have won that last race that they need and the cup may be in the hands of the New Zealanders. On the other hand, Oracle Team USA may have defied the odds even further and taken it to 6 wins in a row. Whichever way it goes, it has been thrilling to watch and I will watch for as long as it keeps going until one or the other does win that elusive 9th race.

 PS. Whatever time limit is applied to a race, there may be times that it is exceeded. For Race 13 the 40 minutes was too short and 45 minutes would have given a result. But 45 minutes could easily have also been too short, so where does one place a limit? The 40 minute limit was written into the rules and all crews knew that it was there.They are not bitching about it, they are getting on with the job at hand, which is to win "The Cup".

Do you find information about Boat Plans Building are you looking for? If not, below may help you find more information about the Boat Plans Building. Thank you for visiting, have a great day.
Read More..

Boat Plans Wood | Photos Of Metal Wastage Caused By Trapped Water

| 0 komentar |

Boat Plans Wood


Here are some photos of what trapped water and moisture will do to a metal hulled boat. This is not to meant sway anyone from buying or owning a metal boat, I own one myself. It is to give all of us a reminder though, that we need to be diligent in maintaining and inspecting our boats. Speaking of inspecting a metal boat, I had a very good comment on the last post from a former client. He has a process that is very impressive when it comes to inspecting a metal boat for purchase. I encourage anyone who is wanting to buy a metal boat or any boat for that matter to do their own close inspection before putting an offer on a boat and hiring a surveyor. I also would advise the seller of a metal boat to hire a surveyor to inspect the boat before listing it. It is important any issues are known about before the boat goes on the market. Too often a person turns down a boat during my inspections. I would much prefer to be part of a happy exchange of a boat then not.

Saltwater was trapped in a keel of an aluminum boat that was filled with foam and lead. The boat got a new redesigned bulb keel.

This is where salt water has dried in a bilge of an aluminum hulled boat.

A view from the exterior of the same boat.

 

This is where water had sat for years on the inside of this steel boat, good news she was made as good as new.



A lot of time these problems are found while the bottom of a boat is sandblasted or a paint blister is ground down for a repair. Which is what happened in the photo below.

So what do we do to make sure we can find these problems?

Refer to the previous post for the answer:

The need of keeping water out of the bilge of a steel boat

and visit more my website for more information about my services.

dbyachtsurvey.com



Do you find information about Boat Plans Wood are you looking for? If not, below may help you find more information about the Boat Plans Wood. Thank you for visiting, have a great day.
Read More..

Boat Plans Bartender | New Plywood Dix 43 Launched

| 0 komentar |

Boat Plans Bartender


Back in the late 1990s Roy McBride of Hout Bay, South Africa, asked me if he could build my steel Dix 43 design in plywood. He had been very impressed by my radius chine plywood method that I developed to build my Didi 38 "Black Cat". He built his boat from the steel plan set assisted by some new drawings detailing important aspects that I supplied. The resulting boat was "Flying Cloud", which resides at Hout Bay Yacht Club.
Roy McBrides "Flying Cloud", built to a very nice standard.
I have never added the Dix 43 to our plywood design list because it is not a fully detailed plywood design. But it does make a really nice boat in that material when a builder wants to build from plywood. Another of these boats has been launched in South Africa, this one built by Gert Bruwer of Saldanha Bay on the West Coast. He has built the aft cockpit version, whereas "Flying Cloud" has a customised deck that is a mixture of our centre cockpit and pilothouse versions.
Gert Bruwers Dix 43 "Scylla".
Gert has been a very loyal customer. He has previously built a steel boat to this same design as well as a steel Dix 38 and a plywood Didi 34 . He preferred the radius chine plywood building method, so selected it for this latest boat.

"Scylla" on hull-turning day. Much of the interior is already in.
Galley of "Scylla", traditional finish of white with hardwood trim.
"Scylla" is sailing well but I dont yet have sailing photos of her.

To see our full range of designs, go to http://dixdesign.com/.

Do you find information about Boat Plans Bartender are you looking for? If not, below may help you find more information about the Boat Plans Bartender. Thank you for visiting, have a great day.
Read More..

Boat Plans Butler | Didi 950 Keel Build by Howdy Bailey

| 0 komentar |

Boat Plans Butler


Howdy Bailey Yacht Services in Norfolk, Virginia, is building the keel for the Didi 950 project in Ohio. This one has a fixed keel that is supported by a steel box on the inside of the hull and which is bolted to the grid structure. The box also forms the engine beds, to concentrate these major weights in a tight area for low pitching characteristics in lumpy water.

Howdy and his staff are doing a masterful job of building this keel, which is assembled over a rigid skeleton of schedule pipes between end plates. The side plates are wrapped over the skeleton and plug welded.
One of Howdys staff welding the keel structure.
Completed keel skeleton with pre-formed side plates awaiting fitting.
Same stage, looking at the top plate.
The tubular internal skeleton, instead of transverse plate spacers, has multiple benefits. The pipes make the skeleton very rigid to resist twisting when fitting the side plates, they have soft surfaces to minimise hard spots that can distort the side plates, they present broad surfaces for plug welding the side plates and they serve as efficient heat sinks to draw heat away from the plug welds, minimising heat distortion.

The keel bolts bear on the keel box inside the hull, sandwiching the hull skin between the the two. Howdy Bailey Yacht Services fabricated the box as well, then shipped it to the builder. He has test-fitted the Beta 15hp motor on the beds ahead of installing the box into the boat. The following photos show the box with engine standing on the integral engine beds.
Didi 950 keel support box front view.
Beta 15 being test-fitted on the engine beds.
Aft view. The holes are for shaft, exhaust and ventilation.
Finding a suitably qualified engineering company to make the keel is often a worry for people considering building an offshore boat. Howdy and his staff have the experience and are available for this work.

To see more of our designs, visit our website at http://dixdesign.com/.

Do you find information about Boat Plans Butler are you looking for? If not, below may help you find more information about the Boat Plans Butler. Thank you for visiting, have a great day.
Read More..

Boat Plans Bruce Roberts | What the Saints did Next

| 0 komentar |

Boat Plans Bruce Roberts


The Saints are the people who live on St Helena Island, a remote island in the middle of the South Atlantic Ocean. They live on a mountain of rock that comes straight up out of the ocean, with steep cliffs all round and nary a beach to be seen. The terrain is very convoluted, with deep valleys and mountain passes. Until now, the only way to reach St Helena has been by boat or ship but soon an airport will be completed, making the island more accessible to others and opening up the world to the islanders. This is an interesting place to visit on Google Earth, to see how remote and inhospitable it is. The new airport can also be seen; consider the mammoth task that it must be taking to create it with the minimal resources available on the island. I imagine that much equipment and material has been shipped in over the past few years to accomplish this.
Saloon view of "Black Cat". Photo courtesy of What The Saints Did Next.
St Helena is the finishing point for the Governors Cup Yacht Race, sailed from False Bay Yacht Club in Simonstown on the western side of False Bay, South Africa, every two years. It was also the place to which Napoleon Bonaparte was banished for his second imprisonment. It was far enough away from anywhere else that he was not able to get up to any more mischief.

What The Saints Did Next is the blog for the island, which helps to keep the world up to date with whatever is happening on the island. The blog has a great post about "Black Cat" and her win in the most recent edition of the race. It includes an interview with the crew about the race and life aboard, as well as a bunch of really nice photos of "Black Cat" and crew.

I hope that I can be on "Black Cat" for her next voyage in this race. Visiting St Helena is on my bucket list as a place to visit. An ancestor of mine and the first Dix to settle in Cape Town arrived from St Helena. What he was doing there I dont know, possibly a soldier guarding Napoleon.

"Black Cat" is the prototype of my Didi 38 design and forerunner of all of my radius chine plywood designs. Visit our website at http://dixdesign.com for more info on my designs.

Do you find information about Boat Plans Bruce Roberts are you looking for? If not, below may help you find more information about the Boat Plans Bruce Roberts. Thank you for visiting, have a great day.
Read More..

Boat Blind Plans | Shaped by Wind Wave eBook

| 0 komentar |

Boat Blind Plans


Yesterday I reworked the digital version of my book "Shaped by Wind & Wave". When I first released it last year it was in ePub format, readable on Nook, Kindle and the host of other Ereaders now competing for the contents of your wallet. The security features sometimes gave problems and eventually the publishing company that I use autocratically dropped the format. They removed my book and the thousands of others in their system from circulation and told us to rework the files as needed then re-issue our books without the security features.



As an interim measure we continued to sell the digital version in the form of html files, to be read on a web browser. Now I have taken the time that was needed to convert my book to the new ePub format and it is ready for purchase in the publications section of our website.

In this format you will be able to read it:-

1) On an Ereader such as Nook, Kindle or similar.

2) On a Computer by downloading the free Adobe Digital Editions .

3) On a smart phone using one of the many available Ereader Apps.

We dont sell this by automatic download because we dont use an automatic credit card processing system, for reasons of security. We process payments manually through our bookkeeping software to safeguard your sensitive information and to give us better control over the process. When the payment has been authorised we will send the ePub file to you by email.

As before, we continue to sell the paperback version of the book, which can also be ordered from the publications section of our website.

Thank you for your support in the past. Keep watching this blog and our website for new designs and other developments. We have some interesting things coming up in the near future.

Dudley Dix

Do you find information about Boat Blind Plans are you looking for? If not, below may help you find more information about the Boat Blind Plans. Thank you for visiting, have a great day.
Read More..